Skip to content

Hardware Guide

Measure your door, identify the lock cutout, and check what will fit before you order.

The DHD Hardware Guide

Measure your door.

See where to put the tape before you shop for replacement door hardware.

Side to side

Measure the backset.

Start at the latch-side edge of the door. Measure straight across to the centre of the handle hole.

Try an example

Example measurements. Check the hardware maker’s template for backset, hole diameter and door thickness. Door preparation reference

Mortise or tubular?

Open your door and look at the latch edge. The cutout tells you how the door was prepared.

MortiseThe tall rectangular pocket holds the lock case shown here. A lever or knob mounts on the door face. Its spindle connects to the case, so turning the handle pulls the latch back.
TubularThe lever or knob mounts over the large round hole. A separate tube-shaped latch slides in from the edge. The handle’s spindle turns the latch mechanism to pull it back.

Replacing a lock?

Start with the cutouts you already have. Matching them usually saves you from patching the door and drilling new holes.

Existing mortise pocket. Compare the and dimensions, the , and the .

Existing round bores. For a tubular replacement, check the diameter of the hole on the face, the diameter of the , and the . If there’s a separate deadbolt, check the spacing between the holes too.

For either type, confirm door thickness against the new lock’s installation template. Check whether the new trim will cover the old screw holes and finish marks.

Starting with a blank door?

Tubular. The simpler prep suits most everyday interior doors. Use a passage lever for a hall or closet, or a privacy set for a bedroom or bath. A tubular entry set paired with a separate deadbolt is also an option for a front door.

When mortise earns the extra work. Say your front door is deadbolted and you want to leave by pressing the inside lever once. On a mortise model designed for that, the lever retracts both the latch and the deadbolt. With a separate, independently operated deadbolt, you turn the bolt first, then press the lever.

Compare the exact function before ordering. Choose mortise when you want that integrated operation and the door can take a precisely cut pocket. If you’re happy operating a separate deadbolt, a tubular set is simpler to fit.

Hardware terms

The DHD Hardware Guide

How to choose.

See how the hardware works and what to measure before you order.

×